How to Remove the Ray Ban Logo?

How to Remove the Ray Ban Logo?

Ray-Ban sunglasses are known for their iconic logo, which is prominently displayed on the temples of the frames. However, there may be instances where you want to remove the Ray-Ban logo for personal or aesthetic reasons. Perhaps you prefer a more minimalist look or want to customize your sunglasses. Whatever the reason, removing the Ray-Ban logo can be done with some careful steps and the right tools. In this guide, we will look at how to remove Ray Ban logo by following simple steps and without damaging your sunglasses.

Ray-Ban RB2132 New Wayfarer Polarized Sunglasses

Step 1: Gather the Necessary Tools

Before you begin the logo removal process, it’s essential to gather the necessary tools. Here’s what you’ll need:

1. Small flathead screwdriver or a similar thin and flat tool.

2. Isopropyl alcohol or rubbing alcohol.

3. Cotton swabs or a soft cloth.

4. Optional: Goo Gone or a similar adhesive remover (if the logo leaves behind residue).

Make sure you have these tools readily available before proceeding to the next step.

Step 2: Prepare Your Work Area

Find a clean, well-lit workspace where you can comfortably work on your sunglasses. Lay down a soft cloth or towel to protect the lenses from scratches or damage during the process. It’s crucial to have a stable surface where you can work without any distractions.

Step 3: Inspect the Logo Placement

Take a close look at the Ray-Ban logo on your sunglasses. The logo is typically located on the temples or arms of the frames. Identify the type of logo you have—whether it’s a printed logo, an adhesive logo, or an engraved logo. The removal process may vary depending on the logo type.

If your Ray-Ban sunglasses have a printed logo, it can be relatively easy to remove. Here’s how:

1. Hold your sunglasses securely and gently insert the small flathead screwdriver or a similar tool under the edge of the logo.

2. Gently lift the logo away from the frame, applying even pressure to avoid bending or damaging the frame.

3. Continue lifting and peeling the logo until it is fully removed.

4. Use a cotton swab or soft cloth dampened with isopropyl alcohol to clean any residue or adhesive left behind.

If your Ray-Ban sunglasses have an adhesive logo, the removal process requires a bit more care. Follow these steps:

1. Start by heating the logo with a hairdryer on a low heat setting. This will soften the adhesive and make it easier to remove.

2. Once the logo feels warm to the touch, gently peel the logo away from the frame using your fingers or the small flathead screwdriver.

3. If the logo is stubborn and doesn’t come off easily, heat it a little longer and try again.

4. After removing the logo, clean any adhesive residue with isopropyl alcohol or a mild adhesive remover like Goo Gone.

If your Ray-Ban sunglasses have an engraved logo, removing it can be a bit more challenging. Here’s what you can try:

1. Apply a small amount of isopropyl alcohol or rubbing alcohol to a cotton swab or soft cloth.

2. Gently rub the engraved logo with the alcohol-soaked cotton swab or cloth.

3. Continue rubbing in circular motions, applying gentle pressure.

4. The alcohol may help fade the logo over time, but complete removal might not be possible without professional assistance.

Step 7: Clean and Polish

Once you have successfully removed the Ray-Ban logo, take some time to clean and polish your sunglasses. Use a soft cloth or lens cleaner to wipe down the frames and lenses, removing any fingerprints or smudges that may have occurred during the removal process. This step will ensure your sunglasses look their best after the logo removal.


Removing the Ray-Ban logo from your sunglasses can give them a unique, customized look. Whether you prefer a logo-free style or want to experiment with personalization, following the steps outlined in this guide will help you achieve the desired results. Remember to work with caution, especially when dealing with adhesive logos or engraved logos. With the right tools and a little patience, you can transform your Ray-Ban sunglasses into a personalized accessory that reflects your individual style.

Share post on
Yasir Jamal
By Yasir Jamal

Hey folks, meet Yasir Jamal here. As a blogger for more than six years, my passion has never faded. I love writing in a variety of niches and writing about outdoor gear and helpful guides for your outdoor ventures. This site is mainly focused on sunglasses. I have a keen interest and bringing in the right information and honest reviews in my blog posts. So stay with me and never spend another dime on a worthless product.

Sunglasses Hook is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Recent Comments