Sunglasses are not just functional accessories for protecting your eyes from the sun; they have also become fashion statements. Many sunglasses brands feature their logos prominently on the sides of the frames, serving as a symbol of style and brand recognition. However, there may be instances when you prefer a more minimalistic look or want to personalize your sunglasses by removing the logo. If you find yourself in such a situation, here’s a step-by-step guide on how to remove a logo from side of sunglasses.
Steps to Remove Logo from Side of Sunglasses
Materials You’ll Need
- Sunglasses with a logo on the side
- Rubbing alcohol or acetone
- Cotton swabs or a soft cloth
- Heat gun or hairdryer (optional)
- Adhesive remover (optional)
- Fine-grit sandpaper (optional)
Step 1: Assess the Logo
Before you begin the removal process, examine the logo on the side of your sunglasses. Determine the material of the logo and its attachment to the frame. Most logos are made of metal or plastic and are either glued or attached with adhesive tape. This assessment will help you choose the most appropriate method for removing the logo without damaging the sunglasses.
Step 2: Remove the Sunglasses Lens
To avoid any accidental damage, it’s best to remove the lens from the sunglasses before proceeding with the logo removal process. Follow the manufacturer’s instructions or gently pop out the lenses using your fingertips. Place the lenses in a safe and clean location to prevent scratching or smudging.
Step 3: Heat the Logo (Optional)
If the logo is attached with adhesive tape, applying heat can help soften the adhesive and make removal easier. Use a heat gun or a hairdryer on a low heat setting and direct the warm air towards the logo. Be cautious not to hold the heat source too close to the sunglasses or use excessive heat, as it can warp or damage the frame.
Step 4: Remove the Logo
If the logo is made of metal or plastic, there are several methods you can try to remove it. Here are a few effective techniques:
4.1 Rubbing Alcohol or Acetone:
Dampen a cotton swab or a soft cloth with rubbing alcohol or acetone. Gently rub the logo, applying slight pressure in a circular motion. This method should help dissolve the adhesive or loosen the logo’s grip on the frame. Continue rubbing until the logo starts to lift off. If necessary, reapply the alcohol or acetone and repeat the process. Be cautious when using acetone, as it can potentially damage certain frame materials.
4.2 Adhesive Remover:
If the logo is stubborn or if rubbing alcohol/acetone doesn’t yield the desired results, you can try using a commercial adhesive remover. Apply a small amount of the adhesive remover to a cotton swab or cloth, and carefully rub the logo. Follow the product instructions and ensure that the adhesive remover is safe to use on the sunglasses’ frame material.
4.3 Sanding (for plastic logos):
For logos made of plastic, sanding can be an effective method. Use fine-grit sandpaper and gently rub the logo in a circular motion. Start with a light touch and gradually increase the pressure until the logo begins to fade. Be careful not to sand too aggressively, as this can damage the frame or leave visible scratches.
Step 5: Clean and Polish
After successfully removing the logo, it’s important to clean and polish the sunglasses to restore their original appearance. Use a clean cloth dampened with water or lens cleaner to wipe away any residue left by the logo removal process. If necessary, repeat the cleaning process until the frame is free of any marks or adhesive remnants. Once cleaned, allow the sunglasses to air dry or gently dry them with a soft cloth.
Step 6: Reassemble the Sunglasses
Once the sunglasses are completely dry and free of any residue, reinsert the lenses back into the frame according to the manufacturer’s instructions. Ensure that the lenses are correctly aligned and securely in place. You can now enjoy your personalized sunglasses without the logo on the side.
Final Thoughts
Removing the logo from the side of sunglasses can be a rewarding DIY project that allows you to customize your eyewear. By following these steps and using the appropriate methods, you can safely remove the logo without causing damage to the sunglasses. Remember to proceed with caution and take your time to achieve the desired results. Enjoy your newly customized sunglasses and embrace their unique, logo-free style!
Recent Comments